Loop Detector
Μαγνητικό πεδίο
CARDIN METALD3
ΠΡΟΣΟΧΗ Γενικά οι ανιχνευτές επαγωγικού βρόχου είναι αξιόπιστοι ανιχνευτές οχημάτων, ωστόσο δεν μπορούν να χρησιμοποιηθούν ως συσκευές ασφαλείας. Πρώτον, οι ανιχνευτές επαγωγικού βρόχου δεν ανιχνεύουν ανθρώπους και άλλα μη μεταλλικά αντικείμενα. Δεύτερον, οι ανιχνευτές επαγωγικού βρόχου έχουν περιορισμένο εύρος ανίχνευσης, δηλαδή μπορούν να ανιχνεύσουν μεταλλικά αντικείμενα μόνο σε μια ορισμένη απόσταση από την περιοχή του βρόχου ανίχνευσης. EN
FREQUENCY
Self-calibrating detector (IP54 - power supply 24V) It is possible to set the work frequency for the inductive coil detector. This option is useful where you have 2 detectors and two coils installed close together. Changing the frequency of one of the two detectors will avoid disturbance. If you are only using one detector we advise you to use the highest frequency setting (no jumper inserted). We advise you to always install a trial coil before embedding to make sure that the installation works to your requirements. A loop detection system is a method of sensing vehicles and is typically used in automated gate applications to prevent a gate from automatically closing on a vehicle or to automatically open the gate when a vehicle is exiting a property. Vehicle loops can also be used to activate card readers, ticket spitters, etc. When properly installed, loops are an extremely reliable form of vehicle detection. The loop detection system operates by creating an electrical field of sensitivity that tunes to the surrounding environment. When a metallic object enters this electrical field, the loop detector senses a change in the field and generates an output, usually activating a relay in a gate operator or other access control device that controls the operation of the gate. TUNING. When the detector LD3 is connected to the power supply, it automatically tunes in the inductive coil with its external environment. The tuning-in stage is shown by blinking of 1 led, indicating sensitisation. Upon completion of the tuning-in operation, sensitivity level led remains lit. If the 4 SENS leds activate (continuously lit) when you connect the power supply, check that the coil is not interrupted or incorrectly connected wired.. A detection device contained in a special protective case.
|
Bρόχος
METALDECO 24X
CARDIN
METALDECO 24X CARDIN
ΜΕΤΑΛΛΙΚΟΣ ΑΝΙΧΝΕΥΤΗΣ METALDECO24X
|